The Latitude provides four terminals from which to power extension boards. Two of these are 24 VDC outputs and are

The Latitude provides four General Purpose 0V terminals which can be used to provide a ground reference point for Extension

The Latitude provides a set of monitored input/output terminals that can receive confirmation signals from the fire routing equipment: FIRE

A 14-way ribbon cable provides the following PSU fault signals to the Panel: Mains Fault Charger Fault Battery Low Voltage

There are two terminals ("A") for connecting the PSU 24 VDC to the Panel Another two terminals ("B") for remote

Latitude provides three programmable inputs for the local monitoring of key-switches or programmed switched inputs. There are no default actions

These connections provide a dedicated RS485 output for signalling to remote monitoring and control products, using a bespoke signalling protocol.

These RS485 terminations are for use with the Syncro and Syncro AS ancillary Expansion Boards.

The Latitude supports five Volt-Free Changeover Relays (all rated at 30 VDC @ 1 A). These are fully programmable but

The Latitude supports two Auxiliary 24V output circuits rated at 500 mA each. These are EN54-13 compliant outputs – but