ESP – Section 6 – The Hochiki Training Academy

6.5 – Setting Sensor Polling/Non-Polling

Paul2026-03-12T10:20:06+00:00

In certain applications, it might be desirable to turn off a sensor's polling LEDs - in hotel rooms for example,

6.5 – Setting Sensor Polling/Non-PollingPaul2026-03-12T10:20:06+00:00

Paul2026-03-12T10:19:31+00:00

The TCH-B200 Handheld Programmer can also be used to determine an attached ESP Sensor's analogue value. The analogue value can

6.4 – Displaying a Sensor’s Analogue ValuePaul2026-03-12T10:19:31+00:00

Paul2026-03-12T10:18:51+00:00

Both ESP Manual Call Points (HCP-E(SCI) and HCP-W(SCI)) are programmed with the TCH-B200 Handheld Programmer in conjunction with a PL-3

6.3 – Programming a Call Point or “Mini Module”Paul2026-03-12T10:18:51+00:00

Paul2026-03-12T10:18:11+00:00

For those ESP devices that have the standard 100mm diameter footprint such as the ESP Sensor range and the CHQ

6.2 – Programming a Sensor or BeaconPaul2026-03-12T10:18:11+00:00

Paul2026-03-12T10:17:40+00:00

Model TCH-B200 is a hand held address programmer designed to address the ESP range of Sensors and all other addressable

6.1 – IntroductionPaul2026-03-12T10:17:40+00:00